About our Jacks & Plugs
Miniature Jack & Plug
Dual cap screw design with dual hold-down screws. ANSI approved. Glass-filled thermoplastic nylon. Rated to 392°F / 204°C. Polarized, polished pin design. Accepts wire sizes 30 to 20 AWG solid or stranded. Choice of wire strain relief grommet sizes: 0.5mm, 1.5mm and 3.0 mm. (1.5mm most common.)
Available Calibrations
| T | E | J | K | |
Standard Series Jack & Plug
ANSI approved. Glass-filled thermoplastic nylon construction. Rated to 394°F / 204°C. Polarized, polished pin design. Single combo cap screw design. Accepts wire sizes up to 30 to 14 AWG solid or stranded. (Maximum wire diameter 5/16") choice of wire strain relief grommet sizes: 1.5 mm, 2.5 mm, and 4.5 mm. (2.5 mm most common.)
Available Calibrations
| T | E | J | K |
Molded on Round Pin Plug (S)
ANSI approved. Glass-filled thermoplastic polyester nylon construction Rated to 525°F / 274°C. Polarized, solid-alloy design. Molded component option (S, S3) only available on manufactured thermocouple.
Available Calibrations
| T | E | J | K |
(S3)
Miniature Molded on Plug
ANSI approved. Glass-filled thermoplastic polyester nylon construction. Rated to 525°F / 274°C. Polarized, polished pin design. Molded component option (M) only available on manufactured thermocouple.
Available Calibrations
| T | E | J | K |
500 Series Miniature Jack & Plug
Single cap captive screw design. No internal wire hold-down screws required. ANSI approved. Glass-filled thermoplastic polyester nylon construction. Rated to 525°F/274°C. Polarized, polished pin design. Accepts wire sizes 30 to 20 AWG solid or stranded. Durable fixed elastomer built-in wire strain relief. Phillips #1 screw.
Available Calibrations
| T | E | J | K |
Conversion Adapters
Thermocouple conversion adapters allow quick and easy connections between standard and mini connector systems. Any combination of adapter is available to transition between male / female and mini / standard connections. ANSI approved. Glass-filled thermoplastic polyester nylon construction. Rated to 392°F / 204°C. No assembly required.
(LTMP/J500) (LTP/J500) (LTMP/P500) (LTMJ/J500)
Available Calibrations
| T | E | J | K |
Having Trouble?
